Material characterization and general modeling
Gy, P. M. (1976). The sampling of particulate materials — A general theory. International Journal of Mineral Processing 3(4), 289–312. The paper provides the framework for treating particulate selection and preparation as distinct sources of measurement error. Article.
Schuhmann, R., Jr. (1940). Principles of comminution, I — Size distribution and surface calculations. AIME Technical Publication 1189. The study compares the log–log distribution and the Rosin–Rammler representation in comminuted material. AIME publication.
Ouchterlony, F. (2005). Three-parameter log-ratio particle size distribution. Mining Technology 114(1), 29–44. See the measured distribution law and the discussion of fit across the size range. Journal article.
Wills, B. A., and Finch, J. A. (2016). Wills' Mineral Processing Technology, 8th edition. ISBN 978-0-08-097053-0. General experimental, processing and equipment background. Publisher edition.
King, R. P. (2001). Modeling and Simulation of Mineral Processing Systems. The treatment connects size and component populations, processes and flowsheet simulation. Publisher preview.
Comminution and scale-up
Bond, F. C. (1952). The third theory of comminution. Transactions of AIME 193, 484–494. Historical development of the reciprocal-square-root energy relation. AIME publication.
Lynch, A. J. (1977). Mineral Crushing and Grinding Circuits. ISBN 0-444-41528-9. Circuit balances, model formulation and process control for crushing and grinding.
Herbst, J. A., and Fuerstenau, D. W. (1980). Scale-up procedure for continuous grinding mill design using population balance models. International Journal of Mineral Processing 7(1), 1–31. Relates laboratory breakage and energy-specific rates to continuous grinding conditions. Journal article.
Herbst, J. A., and Rajamani, K. (1982). Developing a simulator for ball mill scale-up — A case study. AIME. An applied example of laboratory-to-plant model construction with transport and classifier effects. AIME publication.
Venkataraman, K. S., and Fuerstenau, D. W. (1984). Application of the population balance model to the grinding of mixtures of minerals. Powder Technology 39(1), 133–142. Experimental evidence about selection and breakage distributions in mineral mixtures. Journal article.
Torres, M., and Casali, A. (2009). A novel approach for the modelling of high-pressure grinding rolls. Minerals Engineering 22(13), 1137–1146. Industrially relevant pilot-scale studies under varied operating conditions. Journal article.
Classification
Plitt, L. R. (1976). A mathematical model of the hydrocyclone classifier. CIM Bulletin 69(776), 114–123. Empirical correlations for cut size, volumetric flow split, throughput and sharpness. CIM publication.
Nageswararao, K., Wiseman, D. M., and Napier-Munn, T. J. (2004). Two empirical hydrocyclone models revisited. Minerals Engineering 17, 671–687. Discusses correlation lineage, flow split and required calibration. Journal article.
Narasimha, M., Mainza, A. N., Holtham, P. N., Powell, M. S., and Brennan, M. S. (2014). A semi-mechanistic model of hydrocyclones — Developed from industrial data and inputs from CFD. International Journal of Mineral Processing 133, 1–12. Links industrial data and flow assumptions to classification performance. Journal article.
Altun, O., and Benzer, H. (2014). Selection and mathematical modelling of high efficiency air classifiers. Powder Technology 264, 1–8. Experimental and fitted relationships for the reduced efficiency curve in air classification. Journal article.
Mwale, A. N. (2015). A mathematical model for predicting classification performance in wet fine screens. University of Cape Town thesis. Experiments and regression for wet fine screens over a defined aperture range. University repository.
Concentration, transport, and dewatering
Savassi, O. N., Alexander, D. J., Franzidis, J. P., and Manlapig, E. V. (1998). An empirical model for entrainment in industrial flotation plants. Minerals Engineering 11(3), 243–256. Provides experimental grounds for a size-distributed entrainment term. Journal article.
Kynch, G. J. (1952). A theory of sedimentation. Transactions of the Faraday Society 48, 166–176. Establishes a concentration-dependent settling description in an ideal suspension. Journal article.
Ng, K. L. (1990). Dewatering performance of vibrating screen. Proceedings of the Institution of Mechanical Engineers, Part E 204(2), 73–79. Experimental basis for relationships between screen motion and bed drainage. Journal article.
The chapter reading notes include additional source studies for gravity, magnetic separation, flotation columns and probabilistic operations. Use this bibliography to identify the original model family and compare the equations with the regime and units adopted in each chapter. The implementation catalog in the next appendix captures the variants analyzed for this edition.
