The DPSIM Full catalog covered in this edition contains 108 process models, including 33 private implementations. An asterisk identifies a private model. Chapter references point to the physical operator, model comparison or worked calculation that describes each entry. Several catalog entries belong to a single mathematical family. Their independent inputs, regime or destination convention can still differ.
The index uses descriptive equipment names and links each implementation to its technical chapter. Researcher names identify model lineage. For applications requiring exact agreement with an original paper, compare the local calibration, range, units and output definitions to the paper and to plant observations.
Feed
| Model | Chapter | Calculation topic |
|---|---|---|
| Flow Rate Transition | 4 | Prescribed output flow with feed provenance |
| Pulp Dilution Control | 4 | Water addition to a solids mass fraction |
| Batch Feeder | 5 | Discrete material amount with component PSDs |
| Component PSD Feeder | 5 | Component-specific distribution curves |
| Editable Product Stream Feed | 5 | Measured stream as an external boundary |
| Gaudin–Schuhmann PSD Feed * | 5 | Capped power-law feed distribution |
| Log-ratio PSD Feed * | 5 | Feed distribution with median and shape |
| Log-ratio PSD Feed (measured percentiles) * | 5 | Feed shape from measured percentiles |
| Variable PSD Feed Control | 5 | Time-varying size distribution and phase rates |
| Water Feed | 21 | Liquid boundary converted to water mass |
Comminution
| Model | Chapter | Calculation topic |
|---|---|---|
| Available Power Comminution | 6 | Power-limited product coarseness |
| Bimodal Rosin-Rammler Comminution | 6 | Weighted mixture of two size distributions |
| Known P80 Comminution | 6 | Boundary with a prescribed product percentile |
| Rosin-Rammler Product Comminution | 6 | Parametric product curve |
| Specific Energy Comminution | 6 | Bulk energy requirement at the stated solids basis |
| Generic Matrix Crusher | 7 | Class-to-class size transformation |
| King Primary Crusher | 7 | Internal classification and breakage |
| Kojovic impact crusher (calibrated) * | 7 | Energy-linked appearance in impact breakage |
| Modified Whiten Crusher | 7 | Calibrated modifications of the crusher kernel |
| Vendor Known Product Crusher | 7 | Measured supplier product boundary |
| Whiten Crusher | 7 | Repeated capture, breakage and escape |
| Campos HPGR * | 8 | Pressure-driven roll model with a speed solve |
| Morrell–Tondo–Shi HPGR (calibrated) * | 8 | Edge, centre and bypass-zone response |
| Torres-Casali HPGR | 8 | Roll geometry and pressure-zone representation |
| Calibrated Perfect-Mixing Mill (R/D) * | 9 | Steady balance with rate-to-discharge ratios |
| Calibrated Perfect-Mixing Mill (RiDi, steady state) * | 9 | Explicit size-specific rates and discharge |
| Herbst-Fuerstenau Ball Mill | 9 | Power-specific ball-mill breakage |
| Herbst-Fuerstenau PBM Mill | 9 | Population balance with energy-specific rates |
| Population Balance Ball Mill | 9 | Ball-mill selection and appearance |
| Population Balance Rod Mill | 9 | Rod-mill population balance |
| Population Balance SAG Mill | 9 | SAG-mill population balance |
| Population Balance Vertical Mill | 9 | Vertical-mill population balance |
| AG/SAG Mill (Calibrated Variable Rates) * | 10 | Variable rates and grate and pebble discharge |
| Lynch Rod Mill (Calibrated Stages) * | 10 | Staged breakage at a throughput-dependent stage count |
| Vertical Stirred Mill (Perfect Mixing RiDi) * | 10 | Stirred mill with explicit rate and inventory |
| Vertical Stirred Mill (Perfect Mixing) * | 10 | Stirred-mill rate-to-discharge balance |
Classification
| Model | Chapter | Calculation topic |
|---|---|---|
| Component Partition Separator | 11 | Component-specific partition |
| Ideal Size Partition | 11 | Sharp size cut |
| Spline Partition | 11 | Tabulated recovery interpolation |
| Efficiency Screen | 12 | Observed efficiency and screen product allocation |
| Karra Screen | 12 | Size-specific transmission capacity |
| King Screen | 12 | Collection of size-dependent transmission |
| Area-and-Passage Vibrating Screen * | 12 | Area factors and partition under the available area |
| Whiten–White Screen (Panel Rows) * | 12 | Sequential panel row transmission |
| Mwale Fine Wet Screen * | 13 | Wet-screen partition and load dependence |
| Nageswararao Hydrocyclone * | 14 | Separate pressure, cut and water-split relations |
| Narasimha–Mainza Hydrocyclone (2014) * | 14 | Semi-mechanistic geometry and cyclone partition |
| Plitt Hydrocyclone Bravo | 14 | Plitt-derived branch with a revised partition calculation |
| Plitt Modified Hydrocyclone Alpha | 14 | Plitt-derived split and operating corrections |
| Plitt Original Hydrocyclone | 14 | Original geometry and flow correlations |
| Plitt–Flintoff Hydrocyclone (1987) * | 14 | Corrected classification, capacity and bypass |
| Altun–Benzer Air Classifier * | 15 | Air classification with bypass and fish-hook response |
| Plitt–Flintoff Gravity Classifier * | 15 | Geometry, settling contrast and solid–liquid split |
| Target Product P80 Partition | 15 | Inverse cut selected to achieve a product percentile |
Concentration
| Model | Chapter | Calculation topic |
|---|---|---|
| Basic Separation | 16 | Imposed dry and water split |
| Component Recovery Separation | 16 | Component recovery and product grade |
| Feed-Proportional Separator | 16 | Feed-proportional product boundary |
| Product Assay Separation | 16 | Inverse allocation from product grades |
| Three-Parameter Recovery Separation | 16 | Smooth, component-dependent recovery curves |
| Smooth-wall Centrifugal Concentrator (Kroll–Rabotin) * | 17 | Centrifugal film reference and settling |
| Gravity Partition Separator | 17 | Size and density partition |
| King–Rao equilibrium jig * | 17 | Equilibrium stratification and bed split |
| Fluidized-bowl Concentrator (Chen) * | 17 | Fluidized-bowl settling and capture |
| Weibull Force-Ratio Centrifugal Concentrator | 17 | Weibull capture curve |
| Tucker shaking table (calibrated bands) * | 17 | Calibrated density–size bands |
| Tucker spiral concentrator (inner-zone cutter) * | 17 | Density and size response at the inner-zone cutter |
| Baguley dense medium drum (calibrated) * | 18 | Density partition with calibrated misplacement |
| Dunglison dense medium cyclone (calibrated) * | 18 | Density separation with medium segregation |
| King–Schneider Wet Low-Intensity Magnetic Separator * | 18 | Wet low-intensity magnetic capture |
| WHIMS (Dobby–Finch) * | 18 | Matrix capture in high-intensity separation |
| Distributed-Rate Flotation | 19 | Recovery integrated over a distribution of rates |
| Fast-Slow Kinetic Flotation | 19 | Two-rate floatability mixture |
| First-Order Kinetic Flotation | 19 | First-order recovery at fixed elapsed time |
| King Flotation Cell | 19 | Size-dependent rate and mechanical-bank recovery |
| Monotonic Size-Kinetic Flotation | 19 | Monotonic size correction to the flotation rate |
| Finch Column Flotation | 20 | Historical column routing convention |
| Finch-Dobby-Modified Advanced Column Flotation | 20 | Collection, froth survival and capacity |
| Savassi Compartment Flotation Cell * | 20 | Compartment transport, attachment and entrainment |
Dewatering
| Model | Chapter | Calculation topic |
|---|---|---|
| Ng Dewatering Screen * | 13 | Coupled solids capture and water drainage |
| Basic Thickener | 23 | Specified capture and underflow concentration |
| Batch-Settling Thickener Sizing | 23 | Batch interface data and flux-based area |
| Dynamic Sedimentation Thickener | 23 | Solids and water inventory over time |
| Hindered-Settling Flux Thickener | 23 | Limiting solids flux under hindered settling |
| Ideal Kynch Thickener * | 23 | Batch-derived concentration and ideal solids flux |
| Steady-State Thickener | 23 | Steady separation and underflow concentration |
| Basic Filter | 24 | Cake moisture and solids recovery |
Auxiliary
| Model | Chapter | Calculation topic |
|---|---|---|
| Fixed PSD Output | 4 | Imposed product distribution |
| Fixed PSD Output Keeping Grades | 4 | Imposed size distribution at fixed bulk grades |
| Fixed PSD Two Outputs | 4 | Imposed PSD with a complementary product |
| Mixer | 4 | Mass-weighted blending by size and constituent |
| Multi-output Splitter | 4 | Common fractions across multiple exits |
| Stream Splitter | 4 | Common stream allocation |
| Volumetric Splitter | 4 | Allocation on the slurry volume basis |
| King Centrifugal Slurry Pump * | 22 | Slurry derating and pump efficiency |
| Slurry Pump Curve | 22 | Head and affinity scaling |
| Standard Open Launder | 22 | Free-surface depth and hydraulic capacity |
| Standard Slurry Pump | 22 | Imposed stream flow evaluated on a pump curve |
| Belt Conveyor Power | 30 | Belt load and power on specified boundaries |
| Conservative slurry sump | 30 | Mixed phase inventories and overflow |
| Dynamic Conveyor Belt | 30 | Belt travel and delayed discharge |
| Dynamic Overflowing Sump | 30 | Level-triggered overflow path |
| Dynamic Process Pile | 30 | Dynamic bulk solids inventory and discharge |
| Dynamic Sump | 30 | Dynamic slurry storage |
| FIFO bulk hopper | 30 | Parcel-ordered reclaim |
| Layered reclaim stockpile | 30 | Layered internal stock and reclaim order |
| PID Controlled Sump | 30 | Feedback between level and discharge |
| Parcel belt conveyor | 30 | Parcel transport with finite travel delay |
| Static Pile | 30 | Steady inventory boundary |
Plant-level methods
The chapters on survey reconciliation and recycle closure cover mathematics applied across unit operations. The dynamics chapters cover continuous inventory, feedback, timed interlocks and reliability. These plant-level methods are used with the catalog operators and have a different role from a single process equipment model.
Measure the phase or population affected by each modeled change. Establish a check at the smallest boundary where the calculation can be tested and infer whole-plant behavior only after that evidence is consistent with connected inventories and recycles.
